PGA® utilizing an Advantage™ Rangefinder
Related Products
Premium Battery Handle
P/N: 5HT0 
Nickel metal hydride rechargeable battery inside pistol grip battery handle (user cannot remove battery from handle). LED power-confirmation lamp, tripod screw receptacle recessed in handle base, and side mounted data/power connector.
(Advantage™ B requires p/n: ABH0 - Handle Mount)
Economy Battery Handle
P/N: 5H90
Handle that accepts customer supplied standard 9 volt batteries into pistol grip battery handle. Can accept rechargeable 9 volt batteries. Not for use with a tripod; no data port.
(Advantage™ B requires p/n: ABH0 - Handle Mount)
8x Monocular Scope for Advantage™ R
P/N: 5MR0
User-installable, hinge-mounted scope to easily switch between magnified and regular head-up display views.
8x Monocular Scope for Advantage™ S
P/N: 5MS0
User-installable, snap-on scope to easily switch between magnified and regular head-up display views.
Heavy Duty Hard Shell Pro Case
P/N: 5PP0
Hard shell case to protect your new or used laser. Custom foam-fitted insert holds your laser, battery handles, chargers and cables securely.
Standard Hard Shell "Value" Case
P/N: 5PV0
Hard shell case to protect your new or used laser. Custom foam-fitted insert holds your laser, battery handles, chargers and cables securely.
Softside Carrying Case
P/N: 5PC0
Nylon case with shoulder strap, includes four accessory pockets and Velcro closure.
Softside Tripod Carrying Case
P/N: 5PD0
Padded nylon softside tripod carrying case with shoulder strap, handles and zipper closure.
10' 12V Coiled Power Cord
P/N: 5BM0
10' cigarette lighter plug for in-vehicle charging of any rechargeable Laser Atlanta battery handle.
AC Wall Charger w/ Cord
P/N: 5CI0
Universal input 100 volts to 240 volts (50 to 60 Hz) wall plug. Charges Laser Atlanta rechargeable (5HT0) battery handles.
9V Wall Battery Charger
P/N: 5C90
Wall plug 9V charger charges 2 batteries simultaneously. For use with 9V Battery Handle (5H90). 2 high density 9V rechargeable batteries included with charger.
Smart Charging Station™
P/N: 5CS0
Intelligent charging station for any rechargeable Laser Atlanta battery handle. Charges two batteries in two hours. Detection circuitry stops charging when the batteries are fully charged. 110 volt to 220 volt (50 to 60Hz) AC power cord, 12VDC cigarette lighter plug-in cord and user's manual included.
RS-232 Data Cable
P/N: 5BR0
Connects the Advantage™ Rangefinder to a personal computer or other serial communications device. DB-9 serial connector to battery handle’s 6pin circular connector.
TSC-1 Data Cable
P/N: 5BS0
RS232 connection for the Advantage™ system to the Trimble TSC1 data collector. Lemo connector to battery handle’s 6pin circular connector. 6 foot length.
"T" Mode Cable
P/N: 5BT0
Three connector ends allows simultaneous connection to a computer and a data collector.
Monopole/Tripod Yoke
P/N: 5YY0-C
Square tubing monopole yoke w/tripod mounting plate (black) and monopole screw mount. Has the ability to attach to a tripod or monopole. Not for use with Advantage CI models.
Monopole Mountable Yoke
P/N: 5YY0
Round tubular yoke designed to be mounted to a monopole.
Tripod Mountable Yoke
P/N: 5YT0
Round tubular yoke designed to be mounted to a tripod.
Monopole & Yoke Set w/ Basic Tray
P/N: 5YS0
Two-section telescoping aluminum monopole with graduated markings. Yoke for attaching the Advantage™ Rangefinder. Data Collector Tray, and Range Pole Point.
Advantage™ Lugs Added at Purchase
P/N: ARL0 (Advantage R)
P/N: ASL0 (Advantage S)
Brass Lugs on both sides allows laser to pivot and pitch on yoke. (Required for Yoke).
CLICK HERE TO PURCHASE (Advantage R Lugs)
CLICK HERE TO PURCHASE (Advantage S Lugs)
P/N: 5SD0
Stores up to 2GB of data.
Advantage™ User's Manual
P/N: 5DA0
Step by step instructions to operate the Advantage™ Rangefinders (All models).
Refurbish Battery Handle
P/N: 9H01
Upgrades older NiCAD batteries to Nickel Metal Hydride, as need. Replaces NiMH batteries, replaces any worn parts, complete cleaning and testing.
(Refurbishment of internal batteries on Advantage™ B models also available: P/N: 9B01)
Request an RMA for your handle(s) by clicking HERE
Clean and Check
P/N: SRC0
Complete cleaning and calibration of optical and electrical subsystems. Unit adjusted to factory specifications. Minor repairs completed while unit is disassembled.
Request an RMA for your laser(s) by clicking HERE
P/N: PEAW
One year warranty. All calibration, maintenance and repairs are cover except for major physical damage caused by obvious misuse (ran over by a vehicle, explosions, etc.)
copyright © 2013 MPH Industries